| t: 056 7700800 e: sales@irishpowerandprocess.com |
|
|
TEMPERATURE - THE MOST MEASURED PROCESS VARIABLE. (AND MOST MISMEASURED) Burns Series S Sensors
CLICK BELOW FOR A QUICK REFERENCE Product Selection Guide 
0 Comments
 Insacal Conductivity Calibrator With the Insacal Conductivity Calibrator you will be able to validate your conductivity sensors in-line. The Insacal is primarily used in the pharmaceutical industry where there are high requirements for documentations of water purity. But it would also be very useful in other industries like biotechnology or nuclear power. The Insacal Conductivity Calibrator weighs only 4kg and is easily transported to the location of your conductivity. The Insacal can be used for in-situ calibration in closed loop, saving you hours on total calibration time. The calibration can be carried out in two ways, either in an open beaker or in-situ to prevent risk of contamination of the Unit Under Test (UUT). In both cases the calibration is carried out by comparing the UUT to the Insacal Conductivity Calibrator. The advantage is that the Insacal Conductivity Calibrator can be used in a beaker in the laboratory and afterwards it can be used in a closed loop in the production. For further information check out
http://www.irishpowerandprocess.com/application-notes.html |
AuthorIrish Power & Process supply a comprehensive range of field instrumentation, analytical and calibration products for measurement and control within the process industry sectors. Archives
June 2022
Categories
All
|
RSS Feed