METRAHIT 30M

6½ Place, Precision TRMS Laboratory Multimeter, Temperature Measuring Instrument and Data Logger

• Display: +/- 1 200 000 digits
• Inherent deviation: +/-(35 ppm of reading + 70 ppm)
• Measuring functions: 120mV-600VDC and TRMSAC+DC, bandwidth 16Hz-100kHz, 120uA-120mA, 120Ohm-12MOhm, Hz, °C/°F (Pt100, Pt1000, J, K)
• MIN-MAX recording
• Automatic range selection and battery cutoff
• Heavy-duty fuses with 1000 V nominal voltage
• Integrated, 128 kB measurement data memory, 0.1 s to 10 min. sampling period
• IR data interface
• Protective rubber holster
• DKD calibration certificate
• CAT.III @ 300 V or CAT.II @ 600 V per IEC 61010-1

Top of Page

METRAHIT ISO

Digital-Analog TRMS Multimeter with Insulation Measurement for Service Technicians

This inexpensive, universal multimeter has been especially designed to fulfill the requirements of electrical service technicians.
In addition to a multimeter, it also includes an insulation tester (500 V / 1000 V) per VDE 0413, and a precision temperature meter. The optional clip-on ammeter WZ12A allows for trouble-free, safe measurement of current up to 30 A / 100 A.

• Rugged digital multimeter ± 3100 digits, with analog display
• Automatic blocking sockets - ABS
• IR interface
• V DC, VAC/DC, V AC, Ohm, °C (Pt100/Pt1000)
• Continuity and diode testing
• Storage of MIN-MAX values to memory (data hold)
• Minimal inherent deviation ± (0.25% + 1 digit for V DC )
• With cable set, protective rubber cover and DKD calibration certificate
• CSA certification
• DKD calibration certificate

Top of Page

METRACLIP 50

Clip-On Ammeter with Analog Indicator

Measurement value memory mechanical pointer locking device
Electrical safety in accordance with IEC 61010

• Alternating current measurement 1.5 A ... 300 A
• Current to 1200 A continuous, to 4000 A intermittent
• Alternating voltage measurement 150 V ... 600 V
• Clip opening 28 mm diameter

Top of Page

GEOHM C

Battery Powered Earth Tester/ measuring instrument for the measurement of soil resistivity

Compact, handy, menu-driven soil resistivity measuring instrument for 3 and 4-wire connection with continuous monitoring of interference voltage and earth electrode and probe resistance with indication if allowable limit values are exceeded.

Complete indication of all necessary values at a large dot matrix display, or warning with 4 LEDs.
Easily comprehensible, simple operation with 4 keys

• Earth resistance measurement in 5 ranges up to 50 kOhm
• Voltage measurement from 10 to 250 V
• Frequency measurement from 45 to 200 Hz
• Battery monitoring and self-test
• Integrated memory with IrDA interface
• Proprietary calibration certificate
• Extremely rugged, two-component housing
• per VDE 0413 Part 5, EN 61557-5

Top of Page